Vacuum Furnace Transformer, Silicon Molybdenum Rod Heating Transformer, High Current Transformer, Water-Cooled Transformer Water Cooling Transformer

By the strict control of material, optimized design, reasonable processing, Three

phase opening type transformer passed CTQC (certificate test of quality control) by State Transformer Quality

Supervision& Inspection Center. To get reasonable structure and artistic appearance, NOMEX paper from

DVPONT Co. And advanced VPI (vacuum pressure impregnation) technology are both used for the products.

It owns the advantage such as weatherproof, no pollution, safe operation under high temperature, low partial

charge and noise, ideal dissipation of heat, higher capability of overload. It is the new generation of dry

transformer for the environmental protection. It is applicable to load center where requires more in fireproofing

and security, such as airport, metro, power plant, metallurgy plant, hospital, high building, shopping center,

residential area, etc.

Dry type transformers are widely used in local lighting, high-rise buildings, airports, docks, CNC mechanical

equipment, and other places. Simply put, dry type transformers refer to transformers whose iron cores and

windings are not immersed in insulating oil.

The cooling methods are divided into natural air cooling (AN) and forced air cooling (AF). During natural air

cooling, the transformer can operate continuously for a long time at its rated capacity. When forced air cooling is

applied, the output capacity of the transformer can be increased by 50%. Suitable for intermittent overload

operation or emergency accident overload operation; Due to the significant increase in load loss and impedance

voltage during overload, it should not be operated continuously for a long time in a non economic state.

Immersion type dry-type transformers are usually made by impregnating the winding with high-temperature

resistant insulation paint and heating and drying it. According to the needs, different heat-resistant insulation

materials can be selected to be made into B-grade, E-grade, F-grade, H-grade, etc. For example, using NOMEX

insulation material from DuPont in the United States as turn insulation (imported American technology, the coil

surface is generally white), Open type dry-type transformers using VPI (vacuum, pressure impregnation)

insulation treatment process or using glass fiber wrapped wire as turn insulation (imported from Germany, with

darker coil surface color)., The latter adopts VI (vacuum impregnation — no pressure process) insulation

treatment process.

Feature:

1. Environmental protection:

High quality H grade insulation material is used the product, there is no emission of hazardous gases under

high temperature.

Owing to the opening winding, it is convenient to take copper back for recycling after the service life.

2. Reliable insulation system:

NOMEX paper and ET-90 series H grade resin is chosen as basic insulation system, optimized design makes

insulation system 180 degrees centigrade — 220 degrees centigrade, which is safe, steady and reliable under

high temperature.

3. Advanced processing technology:

Adopting VPI technology and curing process under the high temperature, the lacquer film is bright and even, no

cracking, the partial discharge is less than 5PC, with low noise.

4. Overload capacity:

H grade Nomex paper is used for insulation of winding in opening structure. Its dissipation of heat is faster and

temperature rise is even, which shows higher overload capability.

5. Stronger withstanding short-circuit capability:

VPI process is carried out for H. V. &L. V. Coils and pre-pressing device such as disc spring and silicon rubber

is put on the end of coils to strengthen the mechanical strength for both coils and product, which improves its

withstanding short-circuit capability.

6. Weatherproof:

The whole product is coated with H grade insulation lacquer twice. Lacquer film has the good adhesion,

mechanical strength and insulation performance without cracking. Therefore, it is weatherproof such as

moisture, fog and dust, particularly in serious pollution.

Technical parameters:

Our sales team

Our Services 

Thanks for choosing VILLE as your reliable partner and
please trust both of us will create a brilliant future!

 
/* May 10, 2024 16:49:51 */
!function(){function d(e,r){var a,o={};try{e&&e.split(«,»).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1